REX-C100 Digital PID Temperature Controller

Producto nº: AD38955
Tu precio: US$42,95
No. de artículos en existencia: 9
Disponibilidad: En existencia

Descripción:

Este controlador de temperatura utiliza la técnica PID. Es el control de temperatura usando PID, acrónimo de proporcional, integral, derivado. El control PID proporciona una variación continua de la salida dentro de un mecanismo de retroalimentación de bucle de control para controlar con precisión el proceso, eliminando la oscilación y aumentando la eficiencia. Está diseñado para usarse con máquinas industriales y equipo de medición.

Nota: Esta versión NO incluye termocupla!

Acción de Control:

- F: PID action with autotuning (Reverse action)

- D: PID action with autotuning (Direct action)

- W: Heat/Cool PID action with autotuning (Water cooling)

- A : Heat/Cool PID action with autotuning (Air cooling)

Input type - Range code:

- Refer to “9. INPUT RANGE TABLE.”

First control output [OUT1] (Heat-side):

- M: Relay contact G: Trigger for triac driving

- V: Voltage pulse 8: Current (4 to 20 mA DC)

Second control output [OUT2] (Cool-side):

- No symbol: When control action is F or D. M: Relay contact

- V: Voltage pulse 8: Current (4 to 20 mA DC)

Alarm 1 [ALM1], (7) Alarm 2 [ALM2]:

- N: No alarm H: Process high alarm

- A: Deviation high alarm J: Process low alarm

- B: Deviation low alarm K: Process high alarm with hold action

- C: Deviation high/low alarm L: Process low alarm with hold action

- D: Band alarm P: Heater break alarm (HBA)[CTL-6]

- E: Deviation high alarm S: Heater break alarm (HBA)[CTL-12] 4 with hold action R: Control loop break alarm (LBA)

- F: Deviation low alarm with hold action

- G: Deviation high/low alarm with hold action

Para más detalles ver documento adjunto:

REX-C100 Manual.pdf (415446)

(1) Control action
F: PID action with autotuning (Reverse action)
D: PID action with autotuning (Direct action)
W: Heat/Cool PID action with autotuning (Water cooling) 1
A : Heat/Cool PID action with autotuning (Air cooling) 1
(2) Input type, (3) Range code
Refer to “9. INPUT RANGE TABLE.”
(4) First control output [OUT1] (Heat-side)
M: Relay contact G: Trigger for triac driving 2
V: Voltage pulse 8: Current (4 to 20 mA DC)
(5) Second control output [OUT2] (Cool-side) 3
No symbol: When control action is F or D. M: Relay contact
V: Voltage pulse 8: Current (4 to 20 mA DC)
(6) Alarm 1 [ALM1], (7) Alarm 2 [ALM2]
N: No alarm H: Process high alarm
A: Deviation high alarm J: Process low alarm
B: Deviation low alarm K: Process high alarm with hold action
C: Deviation high/low alarm L: Process low alarm with hold action
D: Band alarm P: Heater break alarm (HBA)[CTL-6] 4
E: Deviation high alarm S: Heater break alarm (HBA)[CTL-12] 4
with hold action R: Control loop break alarm (LBA) 5
F: Deviation low alarm
with hold action
G: Deviation high/low alarm with hold action
1 C100 cannot be specified in Heat/Cool PID action.
2 For the C100, when control output is trigger output for triac driving, only the
ALM1 is available.
3 For the C100, there is no second control output.
4 Heater break alarm (HBA) cannot be specified in case of ALM1. Also, it isn’t
possible to specify when control output is current output.
5 As control loop break alarm (LBA), only either the ALM1 or ALM2 is selected.
Check that power supply voltage is also the same as that specified