Buscando :: Micro JPM

RFID Reader ID-20LA (125 kHz) [SEN-11828]

https://www.microjpm.com/products/rfid-reader-id-20la-125-khz/

s. This is the ID-20LA, a very simple to use RFID reader module from ID Innovations. With a built in antenna, the only holdup is the 2mm pin spacing. Power the module, hold up a 125kHz card, and get a serial string output containing the unique ID of

Especificación 221,7 kB

VCNL4010 Proximity/Light sensor

https://www.microjpm.com/products/vcnl4010-proximity-light-sensor/

t is 5 volt compliant so you can use it with 3.3V or 5V logic with no risk of damage. There is an onboard 3.3V ultra low dropout regulator so you can power it with 3.3 to 5.0V. However, if you can give it 5.0V that is ideal since the VIN voltage powe

Especificación 223,9 kB

KIA78R09 Low Dropout Voltage Regulator

https://www.microjpm.com/products/ad38934/

xistencia Description: The KIA78RXX series are Low Dropout Voltage Regulator suitable for various electronic equipments. It provides constant voltage power source with TO-220IS-4 terminal surface mount type PKG. The Regulator has multi function such

Especificación 217,5 kB

KIA78R06 Low Dropout Voltage Regulator

https://www.microjpm.com/products/ad38927/

AGOTADO!! Description: The KIA78RXX series are Low Dropout Voltage Regulator suitable for various electronic equipments. It provides constant voltage power source with TO-220IS-4 terminal surface mount type PKG. The Regulator has multi function such

Especificación 217,6 kB

KIA78R15 Low Dropout Voltage Regulator

https://www.microjpm.com/products/ad38944/

AGOTADO!! Description: The KIA78RXX series are Low Dropout Voltage Regulator suitable for various electronic equipments. It provides constant voltage power source with TO-220IS-4 terminal surface mount type PKG. The Regulator has multi function such

Especificación 217,6 kB

MicroSD card breakout board+ [PID:254]

https://www.microjpm.com/products/microsd-card-breakout-board/

N: Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. Onboard 5v->3v regulator provides 150mA for power-hungry cards 3v level shifting means you can use this with ease on either 3v or 5v systems Use

Especificación 222,7 kB

SparkFun Pro Micro - RP2040 [DEV-18288]

https://www.microjpm.com/products/ad70695/

h internal temperature sensor, 0.5 MSa/s, 12-bit 10x PWM channels Serial Peripherals 2x UARTs 1x I 2 C (Qwiic enabled) 1x SPI Buttons Boot Reset LEDs Power WS2812 Addressable LED 16MB External Flash Memory Dimensions: 1.3in x 0.7in Documentos: Schema

Especificación 229,9 kB

688-RK09K12C0A19 ALPS Potentiometer 10KΩ

https://www.microjpm.com/products/ad31819/

sistance 10kΩ - Resistance taper 1B - Operating temperature range -10℃ to +70℃ - Electrical Performance Total resistance tolerance ±20% - Rated power 0.05W - Maximum operating voltage 50V AC, 20V DC - Insulation resistance 100MΩ min. 250V DC -

Especificación 220,5 kB

Neopixel LED - RGB Addressable, PTH, 5mm Diffused (5 Pack) [COM-12986]

https://www.microjpm.com/products/ad30804/

mon LED form factor, then this is the perfect choice for you. Note: Comes in packs of 5. GET STARTED WITH THE WS2812 HOOKUP GUIDE Features: Power Supply: DC 4.5V - 6V Internal Frequency: 800kHz Single Wire Single Transmission Documents: Hoo

Especificación 221,3 kB

SD Card Shield Module For Arduino

https://www.microjpm.com/products/ad36462/

is a standard SPI interface, which only supports SD / TF card SPI mode communication - Supports SD / SDHC or Micro SD / Micro SDHC with SD adaptor - Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board - SPI Interface: MOSI, MISO, SCK p

Especificación 219,7 kB

Buscar en el sitio