Buscar en el sitio
BLE Bee CC2541 With XBee Socket For Arduino
https://www.microjpm.com/products/ble-bee-cc2541-with-xbee-socket-for-arduino/
s ver los siguientes enlaces: www.itead.cc/wiki/BLE_Bee www.itead.cc/ble-bee.html Specifications Microprocessor CC2541 PCB size 24mm X 24mm X 1.6mm Power supply 3.3V Electrical Characteristics Specification Min Type Max Unit PowerVoltage 3 - 3.3 VC
Especificación 228,5 kB
SparkFun RFM69 Breakout (915MHz) [WRL-12775]
https://www.microjpm.com/products/sparkfun-rfm69-breakout-915mhz/
África. Consulte los reglamentos locales para otras áreas. GET STARTED WITH THE RFM69HCW HOOKUP GUIDE Dimensions: 0.8" x 1.1" Features: Transmit power: -18dBm (0.016mW) to +20dBm (100mW) in 1dBm steps Receive sensitivity: down to -120dBm at 1.2k
Especificación 225,9 kB
FONA - Mini Cellular GSM Breakout uFL Version [PID: 1946]
https://www.microjpm.com/products/fona-mini-cellular-gsm-breakout-ufl-version/
h 2.8V to 5V logic. Vibrational motor (buzzer) driver so you can have noiseless notifications uFL connections for external antenna Indicator LEDs for power and network connectivity Standard SIM slides into the back On its own, this module can't do an
Especificación 228,9 kB
SparkFun microSD Shield [DEV-12761]
https://www.microjpm.com/products/sparkfun-microsd-shield/
ketch. The shield also includes a large prototyping area with a 13x12 grid of 0.1" pitch PTHs. This shield comes populated with a microSD socket, red power indicator LED, and a reset button; but it does not come with headers installed. We recommend t
Especificación 221,7 kB
MQ-8 Hydrogen Gas Sensor Breakout Board
https://www.microjpm.com/products/mq-8-hydrogen-gas-sensor-breakout-board/
has a high sensitivity and fast response time. The sensor’s output is an analog resistance. The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC. This sensor
Especificación 219,5 kB
Coin Cell Battery Holder - 2xCR2032 (Enclosed)
https://www.microjpm.com/products/coin-cell-battery-holder-2xcr2032-enclosed/
a two phillips head screws. Each battery holder will run batteries in series, output up to 6V, and is equipped with an On/Off slide switch and two 6" power wires (one positive and one negative) on the back. Para más detalles ver el siguiente enlace:
Especificación 218,6 kB
FONA 808 Shield - Mini Cellular GSM + GPS for Arduino [PID:2636]
https://www.microjpm.com/products/adafruit-fona-808-shield-mini-cellular-gsm-gps-for-arduino/
is is a petite breakout here . If you just want a plain FONA, click here. This shield fits right over your Arduino or compatible. At the heart is a powerful GSM cellular module (we use the latest SIM808) with integrated GPS. This module can do just
Especificación 231,9 kB
MicroSD card breakout board+ [PID:254]
https://www.microjpm.com/products/microsd-card-breakout-board/
N: Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. Onboard 5v->3v regulator provides 150mA for power-hungry cards 3v level shifting means you can use this with ease on either 3v or 5v systems Use
Especificación 222,7 kB
DM13A 16-bit Constant Current LED Driver
https://www.microjpm.com/products/dm13a-16-bit-constant-current-led-driver/
ures - Constant-current outputs: 3mA to 60mA adjustable by one external resistor - Maximum output voltage: 17V - Maximum clock frequency: 25MHz - Power supply voltage: 3.3V to 5V - In-rush current control - Bit-to-bit skew : ± 3 % Chip-to-ch
Especificación 217,8 kB
Servo - Generic Continuous Rotation (Micro Size) [ROB-10189]
https://www.microjpm.com/products/servo-generic-continuous-rotation-micro-size/
y continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60°. A standard 3-pin power and control cable is attached and all hardware listed below is included. Features: Voltage: 4.
Especificación 221,4 kB
Elementos: 881 - 890 de 1052