Buscando :: Micro JPM

MQ-8 Hydrogen Gas Sensor Breakout Board

https://www.microjpm.com/products/mq-8-hydrogen-gas-sensor-breakout-board/

has a high sensitivity and fast response time. The sensor’s output is an analog resistance. The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC. This sensor

Especificación 219,5 kB

Coin Cell Battery Holder - 2xCR2032 (Enclosed)

https://www.microjpm.com/products/coin-cell-battery-holder-2xcr2032-enclosed/

a two phillips head screws. Each battery holder will run batteries in series, output up to 6V, and is equipped with an On/Off slide switch and two 6" power wires (one positive and one negative) on the back. Para más detalles ver el siguiente enlace:

Especificación 218,6 kB

FONA 808 Shield - Mini Cellular GSM + GPS for Arduino [PID:2636]

https://www.microjpm.com/products/adafruit-fona-808-shield-mini-cellular-gsm-gps-for-arduino/

is is a petite breakout here . If you just want a plain FONA, click here. This shield fits right over your Arduino or compatible. At the heart is a powerful GSM cellular module (we use the latest SIM808) with integrated GPS. This module can do just

Especificación 231,9 kB

DM13A 16-bit Constant Current LED Driver

https://www.microjpm.com/products/dm13a-16-bit-constant-current-led-driver/

ures - Constant-current outputs: 3mA to 60mA adjustable by one external resistor - Maximum output voltage: 17V - Maximum clock frequency: 25MHz - Power supply voltage: 3.3V to 5V - In-rush current control - Bit-to-bit skew : ± 3 % Chip-to-ch

Especificación 217,8 kB

Servo - Generic Continuous Rotation (Micro Size) [ROB-10189]

https://www.microjpm.com/products/servo-generic-continuous-rotation-micro-size/

y continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60°. A standard 3-pin power and control cable is attached and all hardware listed below is included. Features: Voltage: 4.

Especificación 221,4 kB

VCNL4010 Proximity/Light sensor

https://www.microjpm.com/products/vcnl4010-proximity-light-sensor/

t is 5 volt compliant so you can use it with 3.3V or 5V logic with no risk of damage. There is an onboard 3.3V ultra low dropout regulator so you can power it with 3.3 to 5.0V. However, if you can give it 5.0V that is ideal since the VIN voltage powe

Especificación 223,9 kB

TCS34725 - RGB Color Sensor with IR Filter and White LED

https://www.microjpm.com/products/tcs34725-rgb-color-sensor-with-ir-filter-and-white-led/

ble integration time and gain so it is suited for use behind darkened glass. We add supporting circuitry as well, such as a 3.3V regulator so you can power the breakout with 3-5VDC safely and level shifting for the I2C pins so they can be used with 3

Especificación 221,7 kB

CD4051BE Single 8-Channel Analog Multiplexer - Demultiplexer

https://www.microjpm.com/products/cd4051be-single-8-channel-analog-multiplexer-demultiplexer/

E = −5V, analog signals from −5V to +5V can be controlled by digital inputs of 0−5V. The multiplexer circuits dissipate extremely low quiescent power over the full VDD−VSS and VDD−VEE supply voltage ranges, independent of the logic state of

Especificación 218,5 kB

Blower - Squirrel Cage (12V)

https://www.microjpm.com/products/thermal-printer1/

Especificación 219,1 kB

25x30x25mm Heatsink Black For L298N

https://www.microjpm.com/products/a25x30x25mm-heatsink-black-for-l298n/

r de sus tarjetas y circuitos integrados. Cada uno de estos disipadores anodizados negros es perfecto cuando se utiliza junto con nuestro ESP32 Thing Power Control Shield, pero también se ajusta al paquete TO-220. Documentos: Etiquetas : POS: 5F-

Especificación 218,4 kB

Buscar en el sitio