Buscando :: Micro JPM

SCD30 - CO₂ Humidity and Temperature Sensor [SEN-15112]

https://www.microjpm.com/products/a52949/

Sensirion recomienda 7 días de lecturas continuas con al menos 1 hora al día de 'aire fresco' para completar la autocalibración. Características: Power supply voltage: 3.3V - 5.5V NDIR CO2 sensor technology Integrated temperature and humidity sen

Especificación 224 kB

CAN-BUS Shield [DEV-13262]

https://www.microjpm.com/products/can-bus-shield/

N v2.0B up to 1 Mb/s High speed SPI Interface (10 MHz) Standard and extended data and remote frames CAN connection via standard 9-way sub-D connector Power can supply to Arduino by sub-D via resettable fuse and reverse polarity protection. Socket for

Especificación 225,3 kB

LED Cube YELLOW DIY Kit 8x8x8

https://www.microjpm.com/products/ad30342/

O 3mm - 2 x XH2.54 - 40Pin hembra redondo - 9 x 20P IC socket (base integrado) - 9 x 74HC573 DIP - 1 x USB a DC005 cable de alimentación - 1 x DC005 power socket - 1 x 18P IC socket - 1 x ULN2803 DIP - 1 x 40P IC socket - 1 x STC12C5A60S2 (programad

Especificación 222,1 kB

TEC1-12706 Thermoelectric Cooler - 40x40mm

https://www.microjpm.com/products/thermoelectric-cooler-40x40mm/

umentos: - Learn about TECs (Tom’s Wiki) - Learn about thermoelectric effect (Wikipedia) - Example Arduino code to control a MOSFET for power TEC1-12706 Datasheet.pdf (122163) Etiquetas : POS: 3B-28 | COM-10080 | Thermoelectric | Coo

Especificación 222 kB

TEC1-12709 Thermoelectric Cooler - 40x40mm

https://www.microjpm.com/products/ad44779/

Especificación 221,1 kB

Servo - Generic Continuous Rotation (Micro Size) [ROB-10189]

https://www.microjpm.com/products/servo-generic-continuous-rotation-micro-size/

y continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60°. A standard 3-pin power and control cable is attached and all hardware listed below is included. Features: Voltage: 4.

Especificación 221,4 kB

Raspberry Pi Pico [DEV-17829]

https://www.microjpm.com/products/ad60968/

MHz 264kB of SRAM, and 2MB of on-board Flash memory Castellated module allows soldering direct to carrier boards USB 1.1 Host and Device support Low-power sleep and dormant modes Drag & drop programming using mass storage over USB 26 multi-function

Especificación 225,3 kB

Magnetic Card Reader [SEN-11096]

https://www.microjpm.com/products/ad33421/

ion: This is a simple three track magnetic card reader with serial output. This reader connects to your computer with a DB9 for serial and a PS/2 for power and outputs a 9600bps 8N1 ASCII serial stream. Plug the reader into a serial port (or USB to s

Especificación 219,9 kB

Simultaneous RFID Reader SparkFun - M6E Nano [SEN-14066]

https://www.microjpm.com/products/ad34201/

n 2 tags (see Recommended Products) at up to 150 tags per second. Writing of tags is also possible at 80msec standard write. The board has adjustable power output from 0dBm to 27dBm, meaning that with the correct antenna you can read up to 16 feet (4

Especificación 227,8 kB

10A DC Motor Adjuster Speed Control PWM 9V-60V With Forward & Reverse

https://www.microjpm.com/products/ad36280/

la fuente de alimentación antes de realizar cualquier cambio de cableado. Caracteristicas: - Input supply voltage: DC 9V ~ 60V - The maximum output power: 500W - The maximum continuous output current: 8A - The overload and short circuit protecting

Especificación 218,9 kB

Buscar en el sitio